Skip to content

Cisco / Linksys SPAXXX IP Phone Provisioning Guide

← How-To Guides

Cisco / Linksys SPAXXX IP Phone Provisioning Guide

Section titled “Cisco / Linksys SPAXXX IP Phone Provisioning Guide”

This guide covers how to provision Cisco and Linksys SPA series IP phones on the SIPSTACK network using the phone’s built-in web interface.

  • SPA303G
  • SPA501G
  • SPA502G
  • SPA503G
  • SPA504G
  • SPA508G
  • SPA509G
  • SPA215G
  • SPA514G
  • SPA252G
  1. Press Menu on the phone.
  2. Select option 9 (Network).
  3. Note the IP address displayed on screen.
  1. Open a web browser on a computer connected to the same network.
  2. Enter the phone’s IP address in the address bar (e.g., http://192.168.1.100).
  3. Press Enter.
  1. Click Admin in the top-right corner.
  2. Click Advanced in the top-right corner.
  3. Select the Provision tab.
  4. In the Profile Rule field, enter your organization’s provisioning URL with $MA.xml on the end: https://<slug>:<PIN>@cfg.sipstack.com/<slug>/$MA.xml. Your slug and PIN are in Switchboard under Nova PBX → System → PBX Settings → Provisioning Access.
  1. Scroll to the bottom of the page.
  2. Click Save.
  3. The phone will reboot and apply the provisioning configuration.

Once the phone comes back online, it will be registered on the SIPSTACK network.