Skip to content

How to Pair a Bluetooth Headset with a Polycom VVX 600 Series

← How-To Guides

How to Pair a Bluetooth Headset with a Polycom VVX 600 Series

Section titled “How to Pair a Bluetooth Headset with a Polycom VVX 600 Series”

The Polycom VVX 6xx series supports Bluetooth headsets for hands-free calling. Follow these steps to pair a compatible headset.

  • Polycom VVX 6xx series phone with Bluetooth support
  • Compatible Bluetooth headset
  • Headset charged and within 10 meters (30 feet) of the phone
  1. From the Home screen, tap Settings (gear icon).
  2. Select Basic.
  3. Select Bluetooth Settings.
  4. Toggle Bluetooth to On.
  1. Power on your Bluetooth headset.
  2. Activate pairing mode — typically by holding the power button or a dedicated pairing button until the LED flashes.
  1. In Bluetooth Settings on the phone, select Add Device.
  2. The phone will scan for nearby Bluetooth devices.
  3. Select your headset from the list when it appears.
  4. If prompted, enter the pairing PIN (commonly 0000 or 1234 — check your headset manual if unsure).

Once paired, the headset will appear as a connected device in the phone’s Bluetooth settings. Your headset may emit an audible tone to confirm the connection, and the LED indicator will typically show a solid light.

Make a test call to verify audio quality. Adjust the volume on both the phone and headset as needed.

IssueResolution
Phone cannot find headsetEnsure headset is in pairing mode and within range.
Pairing failsRestart both devices and try again.
Poor audio qualityCheck for interference from other wireless devices nearby.
Headset not compatibleVerify Bluetooth compatibility with the VVX 6xx series in your headset’s documentation.