Skip to content
SIPSTACK SIPSTACK Docs

Polycom SoundPoint IP Phone Provisioning Guide

← How-To Guides

Polycom SoundPoint IP Phone Provisioning Guide

Section titled “Polycom SoundPoint IP Phone Provisioning Guide”

This guide walks through provisioning a Polycom SoundPoint IP phone on the SIPSTACK network. If the phone has never been provisioned before, skip directly to Step 3.

Step 1: Reset Device Settings

Section titled “Step 1: Reset Device Settings”
  1. Press Menu.
  2. Select Advanced.
  3. Enter the admin password: 456.
  4. Select Admin Settings.
  5. Select Reset to Defaults.
  6. Select Reset Device Settings.

Step 2: Reset Local Configuration

Section titled “Step 2: Reset Local Configuration”

Once Step 1 is complete:

  1. Press Menu.
  2. Select Advanced.
  3. Enter the admin password: 456.
  4. Select Admin Settings.
  5. Select Reset to Defaults.
  6. Select Reset Local Configuration.

Step 3: Enter Provisioning Server

Section titled “Step 3: Enter Provisioning Server”
  1. Press Menu.
  2. Select Advanced.
  3. Enter the admin password: 456.
  4. Select Admin Settings.
  5. Select Network Configuration.
  6. Select Server Menu.
  7. Set the following parameters:
SettingValue
Server TypeHTTP
Server AddressProvided by SIPSTACK Support
  1. Select Save Settings.

The phone will reboot and come online registered on the SIPSTACK network.

Section titled “Related Resources”
© 2026 SIPSTACK Inc.
Terms Privacy Acceptable Use